Specification
1/2"-4" 200wog brass stem water gate valve
SPECIFICATIONS FOR Manufacturer Supplier Brass Gate Valves:
Descriptions(GATE-010-10):
Body Material: Brass
Ball: brass chrome-plated
Packing: PTFE
Stem and gland: brass
Handle: Iron handwheel
Gland nut: brass
Medium: water
Temperature: -10ºC-110ºC
Thread: Female*Female
Handle: Iron/SS201/SS304 plate (blue and red)
Working pressure: Up to PN 32.0
Gate valves: 200 WOG full port, reduced port.
Thread: PT. PF. NPT. G. BSP. NPS. BSPT
Available from Male to Male
About Gate valve:
A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular
gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces
between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid
and minimum restriction is desired. The gate faces can be parallel but are most commonly wedge-shaped.
Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be
used for regulating flow unless they are specifically designed for that purpose.
Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.
For extremely thick fluids, a specialty valve often known as a knife gate valve is used to cut through the
liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner for
the percent of opening. This means that the flow rate does not change evenly with stem travel. Also, a partially
open gate tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively
high fluid velocity causing gate and seat wear and eventual leakage if used to regulate flow. Typical gate
valves are designed to be fully opened or closed. When fully open, the typical gate valve has no obstruction
in the flow path, resulting in very low friction loss.
1/2''-4'' Brass Gate Valve Specifications:
ITEM: INT-YX-105
Hot Sale products
About us
Our company:
A Professional International Trading Company
Shanghai Intelsheng is an international trader mainly dealing with the most of brass
components including fittings, valves, manifolds, and faucets. We currently export
a variety of products to Europe, the US, and East Asia.
Moreover, our manufacturer, TopFlow, founded in 2005, is equipped with advanced machines, operated
by technical employees and managed by experienced staff. We have 20 years' experience
French R&D team to provide the best design for our products. Besides, ODM and OEM services are
offered for over 10 years.
We provide the best quality and high-cost performance products. As a part of the group of TopFlow,
we are committed to establishing a set of mature and perfect international trading services for customers.
Offering Great Pre-and After-sale Service
Our company places the customer first to build value and trust through superior knowledge of the global
markets we serve. We attach great importance to pre- and after-sales service. Our products and services
will continue to provide innovative water solutions delivered by exceptional people.
Our factory:
to flow, as the headquarters of Intelsheng, is a company of integrating trading and manufacturing,
also is specialized in studying and developing all kinds of brass and stainless steel products, especially
with fittings, valves, and plunger pump components to answer worldwide water solutions needs.
Continuous improvement is a must, done by studying and developing business processes, seeking out
innovative solutions, and listening to market demands, therefore, the company has been separated from
Zhejiang WDK copper in 2006, now TopFlow mainly service OEM fittings and valves, as well as
plunger pump field. Within OEM products, a company holding a strong work relationship with a French
R&D company, who is specialized in the conception and improvement of components for valves and fittings.
Engineers are especially familiar with the designing of brass OEM products.
Our products advantages:
Imported Advanced Machinery manufactures high- performance products.
20 years' experienced French R&D team provide the best designing
Offering a reasonable price, delivering on time, providing a 24-hour after-sales calling service
Diversified brass products, help the customer to carry out one-stop procurement.
Our customer service:
↓
↓ ↓
↓ ↓
↓
↓
↓
↓ ↓
↓
FAQ
Q: Are you a trading company or manufacturer?
A: We are a trading and manufacturer company.
Q: Do you have standard products?
A: Yes, we have standard products. We also manufacture customized products by drawings or
samples. Customers give us drawings and specifications, and we will manufacture accordingly.
Q: What is your payment term?
A: We can accept Paypal or Western Union for trail order, and T/T 30% down payment, balance
to be paid before shipment. or L/C for normal order
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q: What are your advantages?
A: As a professional brass valve and brass fitting manufacturer, we have the most advantages:
1. Made from high-quality Brass.
2. Direct factory price.
3. ODM/OEM and customized services are welcome.
4. Punctuality delivery time.
5. Samples can be offered.
6. Accept small quantity orders.
7. Easy to install.
.............More
Contact us
1/2"-4" 200wog brass stem water gate valve
SPECIFICATIONS FOR Manufacturer Supplier Brass Gate Valves:
Item | Brass gate valve |
Model Number | GATE-010-10 |
Material | Brass/Copper/CW617N/CW614N/CW612N/C36000 |
Size | 1/4''-4'' |
Handle | Iron/SS201/SS304 plate (blue and red) |
Working pressure | PN1.0-32.0 |
Guarantee time | 3 years |
MOQ | 300 pieces |
Packing | Standard export package or Customized |
Payment | TT,L/C,D/P,Western Union |
Trademark | INTELSHENG |
Sample time | 8-10 days, depends on product style and workmanship |
Insurance | Cathay Insurance |
Customized | All customized services are welcome |
Payment Terms | 30% prepaid; 70% balance payment after finish the production before delivery |
QC system | 100% inspection before shipment |
Descriptions(GATE-010-10):
Body Material: Brass
Ball: brass chrome-plated
Packing: PTFE
Stem and gland: brass
Handle: Iron handwheel
Gland nut: brass
Medium: water
Temperature: -10ºC-110ºC
Thread: Female*Female
Handle: Iron/SS201/SS304 plate (blue and red)
Working pressure: Up to PN 32.0
Gate valves: 200 WOG full port, reduced port.
Thread: PT. PF. NPT. G. BSP. NPS. BSPT
Available from Male to Male
About Gate valve:
A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular
gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces
between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid
and minimum restriction is desired. The gate faces can be parallel but are most commonly wedge-shaped.
Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be
used for regulating flow unless they are specifically designed for that purpose.
Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.
For extremely thick fluids, a specialty valve often known as a knife gate valve is used to cut through the
liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner for
the percent of opening. This means that the flow rate does not change evenly with stem travel. Also, a partially
open gate tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively
high fluid velocity causing gate and seat wear and eventual leakage if used to regulate flow. Typical gate
valves are designed to be fully opened or closed. When fully open, the typical gate valve has no obstruction
in the flow path, resulting in very low friction loss.
1/2''-4'' Brass Gate Valve Specifications:
ITEM: INT-YX-105
Gate valve | Thread Size (M&F) | Weight (g) | Body Material | Stem Material | Handwheel Material |
DN15 | 1/2'' | 185 | BRASS COPPER 57 | BRASS COPPER 57 | Iron SS301 SS304 |
DN20 | 3/4'' | 235 | |||
DN25 | 1'' | 320 | |||
DN32 | 1¼'' | 580 | |||
DN40 | 1½'' | 820 | |||
DN50 | 2'' | 1100 | |||
DN65 | 2½'' | 1900 | |||
DN80 | 3'' | 2700 | |||
DN100 | 4'' | 4500 |
About us
Our company:
A Professional International Trading Company
Shanghai Intelsheng is an international trader mainly dealing with the most of brass
components including fittings, valves, manifolds, and faucets. We currently export
a variety of products to Europe, the US, and East Asia.
Moreover, our manufacturer, TopFlow, founded in 2005, is equipped with advanced machines, operated
by technical employees and managed by experienced staff. We have 20 years' experience
French R&D team to provide the best design for our products. Besides, ODM and OEM services are
offered for over 10 years.
We provide the best quality and high-cost performance products. As a part of the group of TopFlow,
we are committed to establishing a set of mature and perfect international trading services for customers.
Offering Great Pre-and After-sale Service
Our company places the customer first to build value and trust through superior knowledge of the global
markets we serve. We attach great importance to pre- and after-sales service. Our products and services
will continue to provide innovative water solutions delivered by exceptional people.
Our factory:
to flow, as the headquarters of Intelsheng, is a company of integrating trading and manufacturing,
also is specialized in studying and developing all kinds of brass and stainless steel products, especially
with fittings, valves, and plunger pump components to answer worldwide water solutions needs.
Continuous improvement is a must, done by studying and developing business processes, seeking out
innovative solutions, and listening to market demands, therefore, the company has been separated from
Zhejiang WDK copper in 2006, now TopFlow mainly service OEM fittings and valves, as well as
plunger pump field. Within OEM products, a company holding a strong work relationship with a French
R&D company, who is specialized in the conception and improvement of components for valves and fittings.
Engineers are especially familiar with the designing of brass OEM products.
Our products advantages:
Imported Advanced Machinery manufactures high- performance products.
20 years' experienced French R&D team provide the best designing
Offering a reasonable price, delivering on time, providing a 24-hour after-sales calling service
Diversified brass products, help the customer to carry out one-stop procurement.
Our customer service:
Technical - equipped with advance imported Japanese machine center, special CNC. Our huge tons of forge
machines solve most of the irregular products.
Reliability - innovative, value-add designs are focused on the end-user and installer to provide ease of
installation and low life-cycle costs.
Serviceability - with two major cooperative partners in Europe and Japan who can offer help to solve most
of cases.
Special professional customized service process:
Send samples or drawings to us |
We provide free design/quotation |
Accept our quotation | Not accept our quotation |
Provide predict-order for us, confirm quantity | Send samples back to you and we pay for samples freight |
Make a mold for you and send samples to you for free |
You test samples |
The samples are approved | The samples are not approved |
Sign a contract and you pay the deposit | ← We can improve the samples for free till samples approved |
Manufacture and Shipping |
FAQ
Q: Are you a trading company or manufacturer?
A: We are a trading and manufacturer company.
Q: Do you have standard products?
A: Yes, we have standard products. We also manufacture customized products by drawings or
samples. Customers give us drawings and specifications, and we will manufacture accordingly.
Q: What is your payment term?
A: We can accept Paypal or Western Union for trail order, and T/T 30% down payment, balance
to be paid before shipment. or L/C for normal order
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q: What are your advantages?
A: As a professional brass valve and brass fitting manufacturer, we have the most advantages:
1. Made from high-quality Brass.
2. Direct factory price.
3. ODM/OEM and customized services are welcome.
4. Punctuality delivery time.
5. Samples can be offered.
6. Accept small quantity orders.
7. Easy to install.
.............More
Contact us